Back
Tags
- 1968
- 1972
- 1973
- 1975
- 1977
- Accent
- Amazon S3
- BLOG
- Calgary
- chrome
- clocks
- cloud storage
- Cobra
- Consolidated Compressor
- CVMG
- ELZ2Coil
- engine
- exhaust
- Gauges
- GT380
- GT500
- GT550
- GT750
- Indy
- Kettle
- Microsoft
- MKI
- Nanton
- Nimbus
- oil injection lines
- rebuild
- restoration
- sand blasting
- Shell
- Suzuki
- T500
- Titan
- Travel
- Ubuntu
- Vintage Connections
- wasserbuffel
- Water Bottle
- Water Buffalo
- Wetaskiwin
- YA6
Tag Archives: Water Buffalo
1973 GT750 – Grills and Forks
The chrome that I had done at Alberta Plating for my 1973 GT750 project bike turned out really well, but not completely without issues. The small screws that hold on the front fender stays were a disappointment as when I … Continue reading
Posted in Motorcycle
Tagged 1973, Alberta Plating Ltd., GT750, GTReiner, Reproduction Decals, restoration, Suzuki, Water Buffalo
Leave a comment
Getting Hosed !
A key change from the 1972 GT750 to the 1973 model was the addition of front disc brakes to replace the original internal cable operated drum brakes. I’m told that brake hose should be changed about every 6 to 8 … Continue reading
Posted in Motorcycle
Tagged 1973, brakes, GT750, Kettle, rebuild, restoration, Suzuki, Water Buffalo
Leave a comment
1973 GT750 – Engine In !
The project continues ! I had the engine fully assembled on the bench and so now was the time to think about who to call to help lift it into the frame – these things are damned heavy, awkward to … Continue reading
Posted in Motorcycle
Tagged 1973, engine, GT750, needle bearing, Pink Possum, restoration, Suzuki, swing arm, Water Buffalo
Leave a comment
1973 GT750 – Oil Pump
The build continues ! Recall when I cracked open the cases on the engine I wanted to use, I found a bit of a mess as it appears the oil had leaked out and been replaced with water over the … Continue reading
Posted in Motorcycle
Tagged 1973, GT750, Kettle, oil pump, restoration, Suzuki, Water Bottle, Water Buffalo
1 Comment
1973 GT750 – Sods and Odds
Still plugging away at different bits and pieces of the 1973 GT750 project bike – I was side tracked with doing some video conversions from some twenty year old 8mm video tapes I had that I wanted saved to hard … Continue reading
Posted in Motorcycle
Tagged 1973, GT750, rebuild, restoration, Suzuki, Water Buffalo
Leave a comment
Frame Differences – Who Really Cares ?
Probably no one cares, but what the heck – winters are long up here and sometimes stuff like this helps to pass the time ! Late in 2009 I needed to do a bit of clean-up and pick which frame … Continue reading
Re-Gauged !
The gauges to fit my 1973 GT750 arrived this week from Barbados, where they were rebuilt by a friend of mine, Allan Tucker. He operates a small Suzuki gauge repair business from his home there, and he is passionate about … Continue reading
Posted in Motorcycle
Tagged 1973, allan tucker, gauge restoration, Gauges, GT750, Suzuki, the glass guild, Water Buffalo
Leave a comment
Powder Follow-up
Long ago – September 9th of this year to be exact – I wrote about prepping a few parts and pieces for the local CVMG Club’s “Powder Day” at a local shop here in Calgary. After getting all the parts … Continue reading
Posted in Motorcycle
Tagged Alberta Plating Ltd., chrome, Consolidated Compressor, CVMG, GT500, GT750, powder coating, Suzuki, Titan, Water Buffalo
Leave a comment
Wire Harness
One of the many items you have to deal with while restoring bikes, is dealing with the sins of the previous owner’s efforts to ‘improve’ the electrical system. In fairness some of the ‘correct’ parts are difficult to find, but … Continue reading
1973 GT750 Rebuild – Rethink
More problems – so making a few changes to the project plan. Once I had the Calgary donor bike stripped down, I was able to put its frame along side the Kincardine frame and then noticed a few differences. Earlier GT750 … Continue reading